Canon 2300 manual Image Combination, 2 on, Special Copying Features

Image Combination

This mode enables you to automatically reduce two or four originals to fit onto one side of a selected paper size.

IMPORTANT

If the machine is operating in the Image Combination mode, you cannot use the Two-Page Separation, Original Frame Erase, Book Frame Erase, or Different Size Originals modes.

You can set the Image Combination mode only for the original sizes shown on the LCD display.

Originals copied in the Image Combination mode must all be the same size. The Image Combination mode cannot be used with free size paper.

You must have enough memory available in order to use the Image Combination mode with paper larger than LTR.

NOTE

The reduction ratio is automatically set so that the originals fit onto the selected paper size.

If the reduction ratio is set to less than 50% in the Image Combination mode, part of the copied image may be trimmed slightly.

If you set the Image Combination mode, the machine is automatically set to the Auto Zoom mode. However, you can also use the Preset Zoom or Zoom by Percentage mode.

■2 on 1

This setting reduces two originals to fit onto one copy sheet, and allows you to select the layout order of each original. The following two layout types are available:

3

Special Copying Features

Original (Vertical Placement)

1

2

IMPORTANT

Copy

No. 1 No. 2

1 2 2 1

The originals are printed	The originals are printed in
in the following order: left	the following order: right
half (1) → right half (2)	half (1) → left half (2)

The layout order cannot be specified when you place an original horizontally.

Image Combination 3-17