2.To add a handle to the tone curve, click on or near the curve.
3.To move a handle, drag the handle into a white area and release it.
4.To remove a handle, do one of the following:
•Drag the handle outside the tone graph
•
5.To undo all changes that you have made to the curve, click Reset.
To save your custom curve, click Save. In the Save As dialog box, enter a file name and directory. Click Save.
Using a Custom Tone Curve
Use the following steps to open a custom tone curve setting that you saved previously.
To apply a previously saved curve:
1.On the Tone tab, click the Special Tone Curves button, and then click Load.
2.In the Open dialog box, select the file name you want to load. Click Open.
Adjusting Contrast/Brightness for Black and White Scan Mode
For black and white scans, the contrast and brightness settings are located on the L60 tab.
Depending on the black and white option you choose for your scan, you can adjust the contrast, brightness, or both of your preview image.
If you use halftone as your scan option, you can adjust both the contrast and brightness of the image.
Scanning
Chapter 6 | Scanning |