Cisco Systems 7600 manual Product Number, RSP720-3CXL-GE

Chapter 2 Route Switch Processors and Supervisor Engines

Overview

Table 2-1 Route Switch Processor and Supervisor Engine Configurations (continued)

Product Number Description

Note See the “QoS on the RSP720-10GE” section on page 2-10for more information about the QoS port architecture on the uplink ports.

RSP720-3C-GE	• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps SFP
	module; port 2 is configurable with either a 1-Gbps SFP module
	or a 10/100/1000-Mbps RJ-45 connector
	• Integrated 720-Gbps switch fabric
	• PFC3C and MSFC4 with 512-MB bootflash, 4-MB NVRAM,
	4-MB ROMmon, and several DRAM options:
	– RP: 1- to 4-GB DRAM (default 1 GB)
	– SP: 1- to 2-GB DRAM (default 1 GB)
	• Two CompactFlash Type II slots on front panel (512 KB default)
	and two internal CompactFlash slots (one each for RP and SP,
	512 KB default for each)
	• Requires larger power supplies and a high-speed fan tray
	• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
RSP720-3CXL-GE	• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps SFP
	module; port 2 is configurable with either a 1-Gbps SFP module
	or a 10/100/1000-Mbps RJ-45 connector
	• Integrated 720-Gbps switch fabric
	• PFC3CXL (high-capacity) and MSFC4 with 512-MB bootflash,
	4-MB NVRAM, 4-MB ROMmon, and several DRAM options:
	– Route processor (RP): 1- to 4-GB DRAM (default 2 GB)
	– Switch processor (SP): 1- to 2-GB DRAM (default 1 GB)
	• Two CompactFlash Type II slots on front panel (512 KB default)
	and two internal CompactFlash slots (one each for RP and SP,
	512 KB default for each)
	• Requires larger power supplies and a high-speed fan tray
	• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
Supervisor Engine 720
WS-SUP720	• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps SFP
	module; port 2 is configurable with either a 1-Gbps SFP module
	or a 10/100/1000-Mbps RJ-45 connector
	• Integrated 720-Gbps switch fabric
	• PFC3A and MSFC3 with 2-MB NVRAM, 512-MB DRAM, and
	64-MB bootflash (see note below)
	• Two CompactFlash Type II slots
	• Requires larger power supplies and a high-speed fan tray
	• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
	Note Cisco IOS Release 12.2SXF is the last release in which the
	Sup720 with PFC3A is supported.

Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

2-4 OL-10100-04