Uplink Port Transceiver Modules | Cisco Systems 7600 manual

Appendix B Cable and Connector Specifications

Uplink Port Transceiver Modules

Uplink Port Transceiver Modules

Transceiver modules that plug into the front panel of the supervisor engine or route switch processor provide the uplink ports for the router. Several types of transceiver modules are available:

small form-factor pluggable (SFP) modules, X2 modules, XENPAK modules, and Gigabit Interface Converter (GBIC) modules.

Table B-1lists the orderable part numbers for supported transceiver modules. In addition, the following tables provide information about the modules and their cabling specifications:

•Table B-2and Table B-3provide information about 1GE uplink ports.

•Table B-4and Table B-5provide information about 10GE uplink ports.

•Table B-6provides information about 1GE GBIC modules.

Table B-1 Uplink Port Transceiver Modules

Supervisor Engine or RSP	Transceiver Module Part Numbers

RSP720 and	10GE Uplink Ports (RSP720-10GE only):
RSP720-10GE	X2-10GB-SR
	X2-10GB-SR
	X2-10GB-LR
	X2-10GB-ER
	X2-10GB-LX4
	X2-10GB-CX4
	1GE Uplink Ports:
	GLC-SX-MM
	GLC-LH-SM
	GLC-ZX-SM
	GLC-T
	GLC-BX-D
	GLC-BX-U
	SFP-GE-S
	SFP-GE-L
	SFP-GE-T

Supervisor Engine 720	GLC-SX-MM
	GLC-LH-SM
	GLC-ZX-SM
	GLC-T

Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

	B-2	OL-10100-04

Image 50

Cisco Systems 7600 manual Uplink Port Transceiver Modules, Transceiver Module Part Numbers

Contents

Americas Headquarters Text Part Number OL-10100-04 Copyright 2007-2008 Cisco Systems, Inc. All rights reserved N T E N T S Safety Precautions for Module Installation and Removal Cleaning the Fiber-Optic Connectors B-15 OL-10100-04 Contents Document History Chapter Title Description Document OrganizationDocument Conventions Convention Description Related Documentation OL-10100-04 Cisco 7600 Product Overview Cisco 7600 Series Routers Supported Hardware Features Feature Description Feature Description Port Addresses Physical Interface Addresses MAC Addresses FAN Status Route Switch Processors Supervisor Engines Overview Product Number Description Product Number RSP720-3CXL-GE WS-SUP720-3BXL WS-SUP32-GE-3B WS-X6K-S2U-MSFC2 Route Switch ProcessorWS-X6K-S2-MSFC2 WS-X6K-S2-PFC2 Supported Chassis, Line Cards, and Modules RSP720 FeaturesUnsupported Hardware and Features RSP720-10GE Features RSP720 with 10GE Uplink Ports Unsupported Features Unsupported Chassis and Modules RSP720-10GE Usage Guidelines and Limitations QoS on the RSP720-10GE QoS Configuration Guidelines Supervisor Engine 720 and Supervisor Engine Front-Panel Controls RSP720, RSP720-10GE, Sup720, Sup32 Color Description Front-Panel LEDs RSP720, RSP720-10GE, Sup720, Sup32Component Description Supervisor Engine Supervisor Engine 2 Front Panel Section on page 3-10 for more information Off when you insert a card Preparing for Installation or Removal Safety Precautions for Module Installation and Removal Preventing Electrostatic Discharge Damage Module Slot Assignments Tools Required for Module InstallationDetermining Module Location Installing a Supervisor Engine or Route Switch Processor Module Ejector Levers and Captive Installation Screws See Figure Removing a Supervisor Engine or Route Switch Processor Hot Swapping OIR Modules Removing and Replacing Memory Connecting to the Console Port Connecting a Terminal Supervisor Engine Connecting to the Uplink PortsConnecting a Modem Module Uplink Ports Using Flash Memory Cards Locating the Flash PC Card Write-Protection Switch Installing a Flash Memory Card Removing a Flash Memory Card Power Management and Environmental MonitoringDetermining Software Feature Support Regulatory Standards Compliance Module SpecificationsSpecification OL-10100-04 Cable and Connector Specifications Limiting Connection Distances Uplink Port Transceiver Modules Transceiver Module Part Numbers 1GE Uplink Ports and Cabling Specifications Product ID Description MMF SMF 10GE Uplink Ports and Cabling Specifications SMF ITU-T Console Port Cabling Specifications Console Port Cabling Specifications and PinoutsGbic Module Cabling Specifications MHz km Micron Console Port Signals and Pinouts Rate bps Distance feet Distance meters Rollover Cable Signal RJ-45 Pin DB-9 PinRJ-45-to-RJ-45 RJ-45-to-DB-9 Console Device RJ-45-to-RJ-45 RJ-45-to-DB-25 Rollover Cable Modem Adapter Signal RJ-45 Pin DB-25 PinRJ-45-to-DB-25 Terminal Console RTS DTR Console Port Console Device RJ-45 ConnectorConsole Port Mode 2 Signaling and Pinouts Sup2 Only Side 2 Pin Signal RD+ TD+ Not used Side 1 Pin Signal Side 2 Pin Signal Fiber-Optic ConnectorsSC Connectors MT-RJ Connectors Figure B-5 SC Optical Connector LC Connectors Figure B-7 LC Fiber-Optic Connector Cleaning the Fiber-Optic Connectors LX/LH Gbic and MMF Cable Considerations Patch Cord Patch Cord Installation OL-10100-04 Active LED MAC GBICs, connecting to Gigabit Ethernet cables Active Console PWR Mgmt LED Link LEDLX/LH Gbic Nvram Status LED System LED