Chapter 2 Route Switch Processors and Supervisor Engines

Overview

Table 2-1 Route Switch Processor and Supervisor Engine Configurations (continued)

Product Number

Description

WS-SUP720-3B

Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps SFP

 

module; port 2 is configurable with either a 1-Gbps SFP module

 

or a 10/100/1000-Mbps RJ-45 connector

 

Integrated 720-Gbps switch fabric

 

PFC3B and MSFC3 with 2-MB NVRAM, 512-MB DRAM, and

 

64-MB bootflash (see note below)

 

Two CompactFlash Type II slots

 

Requires larger power supplies and a high-speed fan tray

 

QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

 

 

WS-SUP720-3BXL

Two Ethernet uplink ports: port 1 supports a 1-Gbps SFP

 

module; port 2 is configurable with either a 1-Gbps SFP module

 

or a 10/100/1000-Mbps RJ-45 connector

 

Integrated 720-Gbps switch fabric

 

PFC3BXL and MSFC3 with 2-MB NVRAM, 1-GB DRAM, and

 

64-MB bootflash; high-capacity PFC3BXL allows routing and

 

forwarding processes to be offloaded from the supervisor engine

 

to the PFC (see note below)

 

Two CompactFlash Type II slots

 

Requires larger power supplies and a high-speed fan tray

 

QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

Note A CompactFlash (CF) adapter with 512-MB bootflash is available for Sup720 modules in Release 12.2(18)SXF and later releases. Use the Cisco part number CF-ADAPTER= for ordering.

Supervisor Engine 32

WS-SUP32-GE-3B

Nine Gigabit Ethernet uplink ports: eight SFP modules and one

 

RJ-45 10/100/1000-Mbps connector

 

Integrated 32-Gbps switch fabric

 

PFC3B and MSFC2 daughter cards (see notes below)

 

QoS port architecture (Rx/Tx): 1p3q8t/1p3q8t

 

 

WS-SUP32-10GE-3B

Two 10-Gigabit Ethernet ports (XENPAKs) and one

 

10/100/1000-Mbps connector

 

Integrated 32-Gbps switch fabric

 

PFC3B and MSFC2 daughter cards (see notes below)

 

QoS port architecture (Rx/Tx): 1p3q8t/1p3q8t

Note To run Release 12.2SRB, the Sup32 requires a minimum of 512-MB DRAM.

Note A CF adapter with 512-MB bootflash is available for Sup32 modules in Release 12.2(18)SXF and later releases. Use the Cisco part number CF-ADAPTER= for ordering.

Supervisor Engine 2

Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

 

OL-10100-04

2-5

 

 

 

Page 21
Image 21
Cisco Systems 7600 manual WS-SUP720-3BXL, WS-SUP32-GE-3B