Cisco Systems 7600 manual 1GE Uplink Ports and Cabling Specifications

Appendix B Cable and Connector Specifications

Uplink Port Transceiver Modules

Table B-1 Uplink Port Transceiver Modules (continued)

Supervisor Engine or RSP	Transceiver Module Part Numbers
Supervisor Engine 32	10GE Uplink Ports (WS-SUP32-10GE-3B only):
	XENPAK-10GB-CX4
	XENPAK-10GB-SR
	XENPAK-10GB-LX4
	XENPAK-10GB-LR
	XENPAK-10GB-ER
	1GE Uplink Ports (WS-SUP32-GE-3B):
	GLC-SX-MM
	GLC-LH-SM
	GLC-ZX-SM
	GLC-T
Supervisor Engine 2	1000BASE-X GBIC modules, which are preinstalled

1GE Uplink Ports and Cabling Specifications

Table B-2describes the 1GE SFP transceiver modules that are used for Cisco 7600 uplink ports. Table B-3provides cabling specifications.

Note Use Category 5 Shielded Twisted Pair cable at the port that supports the10/100/1000-Mbps RJ-45 connector for the RSP720-10GE.

Table B-2 1GE SFP Transceiver Modules

Product ID

Description

Copper Modules

GLC-SX-MM	1000BASE-SX SFP transceiver module for multimode fiber
	(MMF), 850-nm wavelength, LC connector
GLC-LH-SM	1000BASE-LX/LH SFP transceiver module for MMF and
	single-mode fiber (SMF), 1300-nm wavelength, LC connector
GLC-ZX-SM	1000BASE-ZX SFP transceiver module for SMF,
	1550-nm wavelength, LC connector
GLC-T	1000BASE-T SFP transceiver module for Category 5, 5e, or 6
	copper wire; 10/100/1000-Mbps RJ-45 connector
GLC-BX-D	1000BASE-BX10 SFP module for single-strand SMF,
	1490-nm TX/1310-nm RX wavelength (downstream use in
	bidirectional single fiber applications), with Digital Optical
	Monitoring (DOM), LC connector
GLC-BX-U	1000BASE-BX10 SFP module for single-strand SMF,
	1310-nm TX/1490-nm RX wavelength (upstream use in
	bidirectional single fiber applications), with DOM, LC connector
Fiber Modules

Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

OL-10100-04 B-3