Cisco Systems 7600 manual RJ-45-to-DB-25 Terminal Console, RJ-45-to-RJ-45 RJ-45-to-DB-25, Rts Dtr

Appendix B Cable and Connector Specifications

Console Port Cabling Specifications and Pinouts

DB-25 Adapter (for Connecting to a Terminal)

Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 female DTE adapter (labeled “Terminal”) to connect the console port to a terminal. Table B-9lists the pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 female DTE adapter.

Table B-9	Console Port DB-25 Adapter Pinouts
			RJ-45-to-DB-25
			Terminal	Console
Console Port	RJ-45-to-RJ-45 Rollover Cable		Adapter	Device
Signal	RJ-45 Pin	RJ-45 Pin	DB-25 Pin	Signal
RTS	11	8	5	CTS
DTR	2	7	6	DSR
TxD	3	6	3	RxD
GND	4	5	7	GND
GND	5	4	7	GND
RxD	6	3	2	TxD
DSR	7	2	20	DTR
CTS	81	1	4	RTS

1. Pin 1 is connected internally to Pin 8.

Modem Adapter

Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 male DCE adapter (labeled “Modem”) to connect the console port to a modem. Table B-10lists the pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 male DCE adapter.

Table B-10	Console Port Modem Adapter Pinouts
	RJ-45-to-RJ-45		RJ-45-to-DB-25
Console Port	Rollover Cable		Modem Adapter	Modem
Signal	RJ-45 Pin	RJ-45 Pin	DB-25 Pin	Signal
RTS	11	8	4	RTS
DTR	2	7	20	DTR
TxD	3	6	3	TxD
GND	4	5	7	GND
GND	5	4	7	GND
RxD	6	3	2	RxD
DSR	7	2	8	DCD
CTS	81	1	5	CTS

1. Pin 1 is connected internally to Pin 8.

Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

OL-10100-04 B-9