Module Specifications | Cisco Systems 7600 specification

A P P E N D I X A

Technical Specifications

This appendix provides the technical specifications for the Cisco 7600 route switch processors and supervisor engines.

Module Specifications

Table A-1lists the environmental and physical specifications for the Cisco 7600 route switch processors (RSPs) and supervisor engines.

Table A-1 Environmental and Physical Specifications

Item	Specification

Environmental
Temperature, ambient operating	32 to 104°F (0 to 40°C)
Temperature, ambient nonoperating and	–40 to 167°F (–40 to 75°C)
storage
Humidity (RH), ambient	10% to 90%
(noncondensing) operating
Altitude operating	–197 to 6500 ft (–60 to 2000 m)

Physical Characteristics
Dimensions (H x W x D)	1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)
Weight	3 to 10 lb (1.4 to 4.5 kg)

Regulatory Standards Compliance

For information about the regulatory standards that Cisco 7600 series routers comply with, see Regulatory Compliance and Safety Information for the Cisco 7600 Series Routers.

Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

	OL-10100-04	A-1

Image 47

Cisco Systems 7600 manual Module Specifications, Regulatory Standards Compliance

Contents

Text Part Number OL-10100-04 Americas Headquarters Copyright 2007-2008 Cisco Systems, Inc. All rights reserved N T E N T S Safety Precautions for Module Installation and Removal Cleaning the Fiber-Optic Connectors B-15 OL-10100-04 Document History Contents Convention Description Document OrganizationDocument Conventions Chapter Title Description Related Documentation OL-10100-04 Cisco 7600 Series Routers Cisco 7600 Product Overview Supported Hardware Feature Description Features Feature Description Physical Interface Addresses Port Addresses FAN Status MAC Addresses Route Switch Processors Supervisor Engines Overview Product Number Description RSP720-3CXL-GE Product Number WS-SUP32-GE-3B WS-SUP720-3BXL WS-X6K-S2-PFC2 Route Switch ProcessorWS-X6K-S2-MSFC2 WS-X6K-S2U-MSFC2 Supported Chassis, Line Cards, and Modules RSP720 FeaturesUnsupported Hardware and Features RSP720 with 10GE Uplink Ports RSP720-10GE Features Unsupported Chassis and Modules Unsupported Features QoS on the RSP720-10GE RSP720-10GE Usage Guidelines and Limitations QoS Configuration Guidelines Front-Panel Controls RSP720, RSP720-10GE, Sup720, Sup32 Supervisor Engine 720 and Supervisor Engine Color Description Front-Panel LEDs RSP720, RSP720-10GE, Sup720, Sup32Component Description Supervisor Engine 2 Front Panel Supervisor Engine Section on page 3-10 for more information Off when you insert a card Preparing for Installation or Removal Preventing Electrostatic Discharge Damage Safety Precautions for Module Installation and Removal Module Slot Assignments Tools Required for Module InstallationDetermining Module Location Module Installing a Supervisor Engine or Route Switch Processor Ejector Levers and Captive Installation Screws See Figure Removing a Supervisor Engine or Route Switch Processor Removing and Replacing Memory Hot Swapping OIR Modules Connecting a Terminal Connecting to the Console Port Supervisor Engine Connecting to the Uplink PortsConnecting a Modem Module Uplink Ports Locating the Flash PC Card Write-Protection Switch Using Flash Memory Cards Installing a Flash Memory Card Removing a Flash Memory Card Power Management and Environmental MonitoringDetermining Software Feature Support Regulatory Standards Compliance Module SpecificationsSpecification OL-10100-04 Limiting Connection Distances Cable and Connector Specifications Transceiver Module Part Numbers Uplink Port Transceiver Modules Product ID Description 1GE Uplink Ports and Cabling Specifications SMF MMF SMF ITU-T 10GE Uplink Ports and Cabling Specifications MHz km Micron Console Port Cabling Specifications and PinoutsGbic Module Cabling Specifications Console Port Cabling Specifications Rate bps Distance feet Distance meters Console Port Signals and Pinouts Device Signal RJ-45 Pin DB-9 PinRJ-45-to-RJ-45 RJ-45-to-DB-9 Console Rollover Cable RTS DTR Rollover Cable Modem Adapter Signal RJ-45 Pin DB-25 PinRJ-45-to-DB-25 Terminal Console RJ-45-to-RJ-45 RJ-45-to-DB-25 Console Port Console Device RJ-45 ConnectorConsole Port Mode 2 Signaling and Pinouts Sup2 Only RD+ TD+ Not used Side 2 Pin Signal Side 1 Pin Signal Side 2 Pin Signal Fiber-Optic ConnectorsSC Connectors Figure B-5 SC Optical Connector MT-RJ Connectors Figure B-7 LC Fiber-Optic Connector LC Connectors Cleaning the Fiber-Optic Connectors Patch Cord LX/LH Gbic and MMF Cable Considerations Patch Cord Installation OL-10100-04 MAC Active LED Active Console GBICs, connecting to Gigabit Ethernet cables Nvram Link LEDLX/LH Gbic PWR Mgmt LED System LED Status LED