Cisco Systems C200, R2001120402, UCS C200 M1 Replaceable Component Locations

3-11

Cisco UCS C200 Server Installation and Service Guide

OL-20732-02

Chapter 3 Maintaining the Server

Preparing for Component Installation

Replaceable Component Locations

This section shows the locations of the components that are discussed in this chapter. The view shown

is from the top down, with the top cover, internal cable cover, and internal air baffles removed.

•Figure 3-6 shows the Large Form Factor (LFF) version of the server.

•Figure 3-7 on page 3-12 shows the Small Form Factor (SFF) version of the server.

Figure 3-6 Replaceable Component Locations, Large Form Factor (Top View)

1Hard drives (up to four, accessible through

front bays)

7Riser card assembly

2Fan tray 8PCIe card connector on riser card (with

low-profile slot)

3DIMM slots (up to 12) 9Socket for trusted platform module (TPM)

4CPUs and heatsinks (up to two) 10 Socket for mezzanine card

5Motherboard CMOS battery 11 Power supplies (up to two, accessible through

rear bays)

6PCIe card connector on riser card (with

standard-profile slot)

811

910

195724