Cisco Systems R2001120402, UCS C200 M1 manual Screws

Chapter 3 Maintaining the Server

Installing or Replacing Components

Figure 3-26 Replacing a Mounting Bracket for the LSIiBBU08 BBU (Enlarged)

Screws

331002

Step 2 Install the new LSIiBBU08 BBU:

Note The LSIiBBU08 BBU requires minimum LSI MegaRAID card firmware 2.120.133.1322 or later to be recognized. You can use the Cisco Host Upgrade Utility to upgrade your LSI MegaRAID card firmware. Obtain the Cisco Host Upgrade Utility 1.4.1 or later package (including drivers) by navigating from the Cisco.com software download site: http://www.cisco.com/cisco/software/navigator.html

a.Install the BBU cable from the LSI controller card to socket J2 on the new BBU.

Note Align the arrow-mark on the cable connector with the arrow-mark on the socket to avoid damaging the connector pins.

b.Place the new BBU over the new BBU bracket on the fan tray and align the two screw-holes in the BBU with the two preinstalled standoffs on the bracket.

c.Install the two securing screws that hold the BBU to the BBU bracket.

	Cisco UCS C200 Server Installation and Service Guide
OL-20732-02		3-43