Modifying vHBA Properties | Cisco Systems UCSCPCIECSC02 instruction

Managing Network Adapters

		Modifying vHBA Properties
	Name	Description
	PLOGI Timeout field	The number of milliseconds that the system waits before it tries to log
		in again.
		Enter an integer between 1,000 and 255,000.
Step 14 In the SCSI I/O area, review the information in the following fields:
	Name	Description
	CDB Transmit Queue Count	The number of SCSI I/O queue resources the system should allocate.
	field	Enter an integer between 1 and 8.
		Enter an integer between 1 and 8.
	CDB Work Queue Ring Size field	The number of descriptors in each SCSI I/O queue.
		Enter an integer between 64 and 512.
Step 15 In the Receive/Transmit Queues area, review the information in the following fields:
	Name	Description
	FC Work Queue Ring Size field	The number of descriptors in each transmit queue.
		Enter an integer between 64 and 128.
	FC Receive Queue Ring Size field	The number of descriptors in each receive queue.
		Enter an integer between 64 and 128.

Modifying vHBA Properties

Procedure

Step 1 In the Navigation pane, click the Server tab.

Step 2 On the Server tab, click Inventory.

Step 3 In the Inventory pane, click the Network Adapters tab.

Step 4 In the Adapter Cards area, select the adapter card.

If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the Adapter Cards area.

Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4

OL-23489-08

11

Image 11

Cisco Systems UCSCPCIECSC02 manual Modifying vHBA Properties

Contents

Overview of the Cisco UCS C-Series Network Adapters Managing Network Adapters Cisco UCS P81E Virtual Interface Card Viewing Network Adapter Properties Serial Number column Cimc Management EnabledPCI Slot column Product Name column Fault Configuration Pending fieldFIP Mode field NIV Mode field Configuring Adapter Properties Click Save Changes Enable FIP Mode check boxEnable NIV Mode check box Number of VM FEX Interfaces Name field Managing vHBAsGuidelines for Managing vHBAs Viewing vHBA Properties Class of Service drop-down list FC SAN Boot check boxEnable Persistent LUN Binding Default Vlan field Ratov field Enable FCP Error RecoveryLink Down Timeout field Port Down Timeout field LUNs per Target field Interrupt Mode drop-down listFlogi Timeout field Throttle Count field Modifying vHBA Properties World Wide Node Name field Error Recovery area, update the following fields Fibre Channel Interrupt area, update the following fields Name Click Add vHBA Creating a vHBA Fc1 VHBA Boot TableCreating a Boot Table Entry Deleting a vHBA VHBA Persistent Binding Deleting a Boot Table Entry Viewing Persistent Bindings Guidelines for Managing vNICs Managing vNICsRebuilding Persistent Bindings PCI Order field Viewing vNIC PropertiesTrust Host CoS check box Failback Timeout field Enable PXE Boot check boxEnable Uplink Failover check box Receive Queue Count field Interrupt Count fieldCoalescing Time field Coalescing Type drop-down list Transmit Queue Ring Size field Enable TCP Rx OffloadEnable TCP Tx Offload Enable Large Receive check box Modifying vNIC Properties Enable TCP-IPv6 Extension RSS Access Ethernet Interrupt area, update the following fields Ethernet Transmit Queue area, update the following fields Enable TCP Receive Side Scaling Click Add vNIC Creating a vNIC Viewing Virtual FEX Properties Managing VM FEXDeleting a vNIC Virtual Machine Fabric Extender Uplink Failover column Vlan Mode columnPXE Boot field Properties button Coalescing Type field Interrupt Mode field Enable TCP-IPv4 RSS field Enable TCP SegmentationEnable Large Receive field Enable IPv4 RSS field Tftp Server IP Address field Backing Up and Restoring the Adapter ConfigurationExporting the Adapter Configuration Click Export Configuration Click Import Configuration Importing the Adapter ConfigurationRestoring Adapter Defaults Adapter Firmware Installing Adapter Firmware From a Local FileManaging Adapter Firmware Install Firmware button Installing Adapter Firmware From a Tftp Server Activating Adapter Firmware Resetting the Adapter OL-23489-08