Managing Network Adapters
Modifying vHBA Properties
Name | Description | |
Rate Limit field | The data rate limit for traffic on this vHBA, in Mbps. | |
| If you want this vHBA to have an unlimited data rate, select OFF. | |
| Otherwise, click the second radio button and enter an integer between | |
| 1 and 10,000. | |
| Note | This option cannot be used in NIV |
|
| mode. |
PCIe Device Order field | The order in which this vHBA will be used. | |
| To let the system set the order, select ANY. To specify an order, select | |
| the second radio button and enter an integer between 0 and 17. | |
EDTOV field | The error detect timeout value (EDTOV), which is the number of | |
| milliseconds to wait before the system assumes that an error has | |
| occurred. | |
| Enter an integer between 1,000 and 100,000. The default is 2,000 | |
| milliseconds. | |
RATOV field | The resource allocation timeout value (RATOV), which is the number | |
| of milliseconds to wait before the system assumes that a resource cannot | |
| be properly allocated. | |
| Enter an integer between 5,000 and 100,000. The default is 10,000 | |
| milliseconds. | |
Max Data Field Size field | The maximum size of the Fibre Channel frame payload bytes that the | |
| vHBA supports. | |
| Enter an integer between 256 and 2112. | |
Channel Number field | The channel number that will be assigned to this vHBA. | |
| Enter an integer between 1 and 1,000. | |
| Note | NIV mode is required for this |
|
| option. |
Port Profile | The port profile that should be associated with the vHBA, if any. | |
| This field displays the port profiles defined on the switch to which this | |
| server is connected. | |
| Note | NIV mode is required for this |
|
| option. |
Step 9 In the Error Recovery area, update the following fields: | ||
Name | Description | |
Enable FCP Error Recovery | If checked, the system uses FCP Sequence Level Error Recovery | |
check box | protocol |
Cisco UCS
13 |