Citizen Systems iDP3420, iDP3421, iDP3423 ESC "p" m n1 n2

iDP3420/3421/3423 User’sMa nual

103 CITIZEN

ESC "p" m n1 n2

[Function] Specifying the pulse generation

[Code] <1B>H <70>H m n1 n2

[Range] 0 ≤m≤1

0≤n1 ≤n2 ≤255

[Outline] Thiscommand outputs the signals specified with n1 and n2 to the connector pins.

m Connector Pin

0 Drawer kick connector No. 2 pin

1 Drawer kick connector No. 5 pin

TheONtimeisn1×2mS and the OFF time is n2×2mS.

[Caution] The user should consider driving the drawer at the following duty ratio.

ON time÷( ON time + OFF time) ≤0.2

(It is recommended to make n2 four timeshighe r or more than n1.)

The drawer kick-ou ts olenoid should have a res istance value of 36Ωor more. Do not use a

lower one becaus e an overcurrent will flow. For the drawer p ower, be sure to use the

printer power (Drawer kick- out connector No. 4 pin).