iDP3420/3421/3423 User ’s Manual
ESC DC3 n
[Function] | Printing the message |
[Code] | <1B>H <13>H n |
[Range] | 1 ≤ n ≤ 10 |
[Function] | This command prints a message. If the value of n is specified beyond the range, the |
| message will not be printed. |
ESC "y" n
[Function] | Setting the print lines after paper near end detection |
[Code] | <1B>H<79>H n |
[Range] | 0 ≤ n ≤ 255 |
[Outline] | This command sets the number of print lines after paper near end detection. It stops |
| printing after printing n × 2 lines since detection of the paper near end, resulting in the paper |
| near end state (See 4.12 Operation Panel and Error Indications). The PE signal (Parallel |
| interface only) changes when the paper near end is detected. |
[Default] | n = 0 |
108 | CITIZEN |
