Citizen Systems iDP3420, iDP3421, iDP3423 user manual ESC DC3 n, ESC y n

iDP3420/3421/3423 User ’s Manual

ESC DC3 n

[Function]	Printing the message
[Code]	<1B>H <13>H n
[Range]	1 ≤ n ≤ 10
[Function]	This command prints a message. If the value of n is specified beyond the range, the
	message will not be printed.

ESC "y" n

[Function]	Setting the print lines after paper near end detection
[Code]	<1B>H<79>H n
[Range]	0 ≤ n1 ≤ 255
[Outline]	This command sets the number of print lines after paper near end detection. It stops
	printing after printing n × 2 lines since detection of the paper near end, resulting in the paper
	near end state (See 4.12 Operation Panel and Error Indications). The PE signal
	(Serial/Parallel) changes when the paper near end is detected.
[Default]	n = 0

55 CITIZEN