iDP3420/3421/3423 User ’s Manual
ESC "∗" n1 n2
[Function] | Specifying the bit image mod e | ||
[Code] | <1B>H <2A>H n1 n2 | ||
[Range] | 1 ≤ n1 + 256 × n2 ≤ 378 | ||
[Outline] | This command allows printing in the bit image mode. Divide the number of dots printed by | ||
| 256 and assume its quotient to be n2 and remainder to be n1. Therefore, the number of | ||
| horizontal dots will be n1 + 256 × n2. | ||
| If the bit image data is entered beyond the dot positions printable in one line, the surplus data | ||
| will be discarded. Normal data processing is restored after bit image printing. Printing is | ||
| done in a single direction. | ||
|
|
|
|
|
|
|
|
ESC "−" n
[Function] | Specifying/Canceling the underline |
|
[Code] | <1B>H <2D>H n |
|
[Outline] | This command selects/deselects an underline. | The underline is selected at n = 1 and |
| deselected at n = 0. |
|
[Default] | n = 0 |
|
| 46 | CITIZEN |
