iDP3420/3421/3423 User’sMa nual
38 CITIZEN
11. DRAWERKICK-OUT CONNECTOR11.1 Specifications of Drawer Kick-Out Connector
(1) Drawer kick-out drive signal
Parallel -----Can be learned at the no.34 pin of theinterface connector
Serial ----- Providedwith a commandto learnthe status in the Star and ESC/POS modes.
(2) Electricalchara cteristics
1) Drive voltage: 24 V DC
2) Dr ive c urren t: 0 .8 A at maximum (Within 510ms)
3) Switch signal: Signal level "L" = 0 to0.5 V
"H" = 3 to 5 V
11.2 Connector'sPin Configuration
No. Signal Function
1 FG Frame Ground
2 DRAWER 1 Drawer 1 drive s ignal
3 DRSW Drawer switc h input
4 VDR Drawer drive power
5 DRAWER 2 Drawer 2 drive s ignal
6 GND Commonground on t he circuit
Connector used : TM5RJ3 -66 (HIROSE)
Applicable connector : TM3P-66P (HIROSE) or eq uivalent
CAUTION :•Nooutput is madewhile printing.
•The drawers 1 a nd 2 cannot be drive n simultaneously.
•A solenoid used for the drawer should be of 36Ωor more . An o utput current should be
kept below 0.8 A. Use beyond this limit cannot b e assured.
•This connectorcannot be connected to a telephone line. Do not connect other than
the solenoid.