Compaq AA-Q88CE-TE manual Parameters for rtrsendtoserver, Expendable Noexpendable

CALL RTR_SEND_TO_SERVER

Table 6–14 Parameters for rtr_send_to_server

C Parameter Name	C Parameter Value	Command Line Specification
channel		/CHANNEL_NAME=name
flags	RTR_NO_FLAGS	none [D]
	RTR_F_SEN_EXPENDABLE	/EXPENDABLE
	RTR_F_SEN_READONLY	/READONLY
	RTR_F_SEN_RETURN_TO_SENDER	/RETURN_TO_SENDER
pmsg, msglen,		[message definition parameter list with
msgfmt1		positional qualifiers. ]

1The actual values used for pmsg, msglen and msgfmt are based upon the message definition you specify as a command line parameter.

The command server uses message data specified as command line parameter values to generate a record containing the message data (for the pmsg parameter), the message length (for the msglen parameter), and a record type description (for the msgfmt parameter).

Qualifiers

/ACCEPT

/NOACCEPT

The /ACCEPT qualifier sets the flag RTR_F_REP_ACCEPT in the call to send_to_server( ). It means the transaction is accepted by this client.

/CHANNEL_NAME=channel_name

/CHANNEL_NAME=RTR$DEFAULT_CHANNEL

Specifies the channel for which the operation is to be performed.

The command server uses a combination of the channel_name and the window from which the call was issued to uniquely identify which channel to use.

channel_name is not case sensitive.

The default channel name is RTR$DEFAULT_CHANNEL.

/CLUSTER /NOCLUSTER (D)

Specifies that the command is executed on all the nodes in the cluster.

If neither /NODE nor /CLUSTER is specified then the command is executed on the nodes specified by the latest SET ENVIRONMENT command. If no SET ENVIRONMENT command has been entered then the command is executed only on the node where the command was issued.

Note: In environments that do not support clustering, use of the /CLUSTER qualifier will cause the relevant command to be executed on the local node only.

/EXPENDABLE

/NOEXPENDABLE

The /EXPENDABLE qualifier sets the flag RTR_F_SEN_EXPENDABLE in the call rtr_send_to_server( ).

/FORMAT[=fmt-string] /NOFORMAT (D)

Specifies that a format string should be sent with this message.

RTR Command Line Interface 6–39