Compaq AA-Q88CE-TE manual AVERAGE=keyword, Noaverage, CHARACTER=char

DISPLAY BAR

Qualifiers

/AVERAGE=(keyword,...)

/NOAVERAGE

Specifies that the items being monitored relating to keyword are displayed as an average. This allows a number of items to be averaged in one qualifier.

The keyword can be one of the following:

Keyword	Meaning
NODE	Node data items
LINK	Link data items
FACILITY	Facility data items
PROCESS	Process data items
PARTITION	Partition data items
FE_TRANSACTION	Frontend transaction data items
TR_TRANSACTION	Backend transaction data items
BE_TRANSACTION	Router transaction data items

/BELL[=Boolean-expression] /NOBELL (D)

Sends a bell character to the terminal if Boolean-expressionevaluates to True (non-zero).

/BLINK[=Boolean-expression] /NOBLINK (D)

Specifies that the displayed value blinks if Boolean-expressionevaluates to True (non-zero).

/BLANK[=Boolean-expression] /NOBLANK (D)

Specifies that the displayed value is replaced by blanks if Boolean-expressionevaluates to True (non-zero).

/BOLD[=Boolean-expression] /NOBOLD (D)

Specifies that the item is displayed in high intensity if Boolean-expressionevaluates to True (non-zero).

/CHARACTER[=char]

/NOCHARACTER /CHARACTER="a" (D)

Specifies the character used to draw bar charts. The line drawing character set is used to display them. By default, the character ``a'' is used, which corresponds to a rectangular block in the character set. If /NOCHARACTER is given then no characters are displayed and the bar is visible only if attributes have been specified. This can be used to draw a scale behind the bar chart.

/DAMPING[=damping-factor] /NODAMPING (D)

Specifies that the value displayed is to fluctuate more slowly than the raw measured value. The default for damping-factoris one. Damping is only relevant if /VALUE=CURRENT.

6–68RTR Command Line Interface