Compaq AA-Q88CE-TE manual =column /X=previous-column D

DISPLAY NUMERIC

Keyword	Meaning
LINK	Link data items
FACILITY	Facility data items
PROCESS	Process data items
PARTITION	Partition data items
FE_TRANSACTION	Frontend transaction data items
TR_TRANSACTION	Backend transaction data items
BE_TRANSACTION	Router transaction data items

/UNDERLINE[=Boolean-expression] /NOUNDERLINE (D)

Specifies that the displayed value is underlined if Boolean-expressionevaluates to True (non-zero).

/VALUE[=value-type] /VALUE=CURRENT (D)

Specifies how the value is processed before being displayed. Value-typecan be one of the following keywords:

•CURRENT - (default) display the current value of expression

•AVERAGE - display the average value of expression since the MONITOR command was issued.

•MINIMUM - display the minimum value of expression since the MONITOR command was issued.

•MAXIMUM - display the maximum value of expression since the MONITOR command was issued.

Use the MONITOR/RESUME command to reset average, maximum or minimum values.

/WIDTH[=field-width] /WIDTH=1 (D)

Specifies the width (in number of characters) to display a numeric. If more characters than width are required then the number will be shifted to the right. No data will be lost but columns of numbers will no longer line up. If /WIDTH=1 is specified (the default) then numbers are displayed left justified.

/X[=column] /X=previous-column (D)

Specifies the screen column where the item is displayed (the leftmost column is

1). By default, items are displayed in the same column as defined by the previous DISPLAY command.

/Y[=row] /Y=next-free-row (D)

Specifies the screen row where the item is displayed (top row is 1). By default, items are displayed on the next free row after the item defined by the previous DISPLAY command.

RTR Command Line Interface 6–75