Compaq AA-Q88CE-TE manual Call Rtrrequestinfo, Parameters for rtrrequestinfo

CALL RTR_REQUEST_INFO

CALL RTR_REQUEST_INFO

The CALL RTR_REQUEST_INFO command causes a command server to execute the rtr_request_info( ) routine and to display the returned status.

Format

CALL RTR_REQUEST_INFO

Command QualifiersDefaults

/CHANNEL_NAME=channel-name /CHANNEL_NAME=RTR$DEFAULT_CHANNEL

/CLUSTER	/NOCLUSTER
/GETITM=item-name	none
/INFCLA=infoclass	none
/NODE[=node-list]	/NODE=default-node-list
/OUTPUT[=file-spec]	/OUTPUT=stdout
/SELITM=item-name	none
/SELVAL=item-value	none

Description

The CALL RTR_REQUEST_INFO command causes a command server to call to the rtr_request_info( ) routine using values supplied on the command line.

The rtr_request_info( ) routine itself is described in Application Programmer's Reference Manual.

The prototype of rtr_request_info( ) is:

rtr_status_t rtr_request_info (

rtr_channel_t *pchannel,

rtr_req_flag_t flags, rtr_infoclass_t infcla

rtr_itemcode_t selitm

rtr_selval_t selval

rtr_itemcode_t getitms ) ;

Table 6–13 shows the correspondence between values you supply on the command line and the C language parameter values produced and used for the call.

Table 6–13 Parameters for rtr_request_info

C Parameter Name	Parameter Value	Command Line Specification
*pchannel		/CHANNEL_NAME=name
flags	RTR_NO_FLAGS	[none] [D]
infcla	RTR_INFCLA_BACKEND_TX	/INFCLA=BTX
selitm	fdb_f_name	/SELITM=fdb_f_name
selval	CASHFACIL	/SELVAL=CASHFACIL
getitms	fe_node_id	/GETITMS=fe_node_id

RTR Command Line Interface 6–35