Compaq AA-Q88CE-TE manual RTR Show PARTITION/ROUTER/FULL, RTR Show PARTITION/BACKEND

SHOW PARTITION

•The state of transaction presentation - one of active, suspended or suspending

•The current failover policy - one of fail_to_standby, fail_to_shadow or pre_ v32_compatibilty

The SHOW PARTITION comand displays callout server data as backend server data because a callout server uses server, not router, data structures. A callout server actually runs on the router identified for its facility.

/NODE[=node-list] /NODE=default-node-list (D)

Specifies that the command is executed on all nodes specified in node-list. If node-listis omitted then the command is executed only on the node where the command was issued.

/OUTPUT[=file-spec] /OUTPUT=stdout (D)

Specifies that the resulting information is written to the file file-spec. If /OUTPUT or file-specis omitted then the standard or default output is used.

/ROUTER /NOROUTER (D)

Displays information about router partitions; it shows the partition state and partition low and high bounds. It can be used to quickly determine the current primary node for a given partition. Using /ROUTER with /FULL provides more detailed information, such as the main, shadow and standby servers for the partitions, as seen from the router.

Partition bounds are shown as ASCII characters if there is a translation, otherwise as hexadecimal digits. Only the least significant four bytes are shown.

Examples

The following example shows a router partition.

RTR> SHOW PARTITION/ROUTER
Facility		Low Bound	High Bound	Primary Main
RTR$DEFAULT_FACILITY		0	4294967295	depth
RTR> SHOW PARTITION/ROUTER/FULL
Facility:	RTR$DEFAULT_FACILITY		State:	ACTIVE
Low Bound:		0	High Bound:	4294967295
Failover policy:				fail_to_standby
Backends:				depth
States:				active
Primary Main:		depth	Shadow Main:

The following examples show two backend partitions.

RTR> SHOW PARTITION/BACKEND
Partition name	Facility	State
RTR$DEFAULT_PARTITION_16777217	RTR$DEFAULT_FACILITY	active
RTR$DEFAULT_PARTITION_16777218	RTR$DEFAULT_FACILITY	active
RTR> SHOW PARTITION/BACKEND/FULL

6–154RTR Command Line Interface