Compaq AA-Q88CE-TE manual Introduction Remote Commands

Introduction

1.5 Remote Commands

This command starts RTR on the three nodes.

Note

The /CLUSTER and /NOCLUSTER command qualifiers refer to cluster support. These qualifiers are for operating systems that fully support clustering. Use of the /CLUSTER qualifier on systems that do not have clustering causes the relevant command to be executed on the local node only. For example Windows 95 systems do not support clustering.

If several commands need to be executed remotely on the same nodes then the set environment command can be used to save typing.

For example:

% RTR

RTR> set environment/node=(nodeA, nodeC) RTR> stop rtr

This example shows the use of the set environment command to stop rtr on Node A and Node C. More details concerning the commands used in the above examples are contained in Section 6.2.

1–4Introduction