Compaq AA-Q88CE-TE manual Monitor monitor-file-spec, Monitor-file-spec

MONITOR

MONITOR

Displays a monitor picture on the screen.

Format

MONITOR [monitor-file-spec]

Command Qualifiers	Defaults
/CLUSTER	/NOCLUSTER
/COUNT=nr-updates	/COUNT=infinite
/FACILITY=facility-name	/NOFACILITY
/IDENTIFICATION=process-id	/NOIDENTIFICATION
/INTERVAL=delay-seconds	/INTERVAL=2
/LINK=link-name	/NOLINK
/NODE=node-list	/NODE=default-node-list
/OUTPUT[=file-spec]	/OUTPUT=stdout
/PARTITION=partition-name	/NOPARTITION
/RESUME	/NORESUME
/VERIFY	/NOVERIFY

Description

The MONITOR command allows certain RTR status variables to be continuously displayed on your terminal.

The individual items displayed in the monitor picture may be defined interactively using DISPLAY commands and then executed using a MONITOR /RESUME command.

You may also put the DISPLAY commands into a file (called a monitor file) and then issue a MONITOR monitor-file-speccommand.

Parameters

monitor-file-spec

Specifies a file containing DISPLAY commands. Monitor file names are of the form

monitor-file-spec.mon

This file may specify either a user defined display or one of the standard displays supplied with RTR. If monitor-file-speccontains only the file-name portion of a file specification then the RTR utility first searches the platform-specific location(s) for a standard monitor file.

Qualifiers

/CLUSTER /NOCLUSTER (D)

Specifies that all nodes in the cluster are monitored.

If neither /NODE nor /CLUSTER is specified then the nodes specified with the latest SET ENVIRONMENT command is monitored. If no SET ENVIRONMENT has been issued then the MONITOR command is executed on the node where it was issued.

6–100RTR Command Line Interface