Compaq AA-Q88CE-TE manual PRCLM=subprocess-limit /PRCLM=10 D

START RTR

The default value of page-fileis automatically calculated, based on the values of /LINKS and /PROCESSES.

/PRCLM=subprocess-limit /PRCLM=10 (D)

Specifies the maximum number of subprocesses that the RTR ACP can create.

The default for subprocess-limitis 10.

/PRIORITY=priority /PRIORITY=6 (D)

Requires alter priority (ALTPRI) privilege to set the priority higher than your current process.

Specifies the base priority at which the RTR ACP executes.

The priority value is a decimal number from 0 through 31, where 31 is the highest priority and 0 is the lowest. Normal priorities range from 0 through 15; real-time priorities range from 16 through 31.

Higher priorities result in faster response, but lower priorities may be more CPU efficient and give a higher overall throughput.

/PROCESSES=max-processes /PROCESSES=64 (D)

Specifies the maximum number of processes that can use RTR on this node. The max-processesvalue is set to the maximum number of processes allowed by OpenVMS. The default is 64.

/TQELM=queue-limit /TQELM=2000 (D)

Specifies the maximum number of timer queue entries that the RTR ACP can have outstanding at any one time. This number includes timer requests and scheduled wakeup requests.

The default for queue-limitis 2000.

/WSDEFAULT=working-set /WSDEFAULT=2000 (D)

Specifies the default working set size for the image running in the RTR ACP.

working-setcannot be greater than the working set quota (specified with the /WSQUOTA qualifier).

The default for working-setis 2000.

/WSEXTENT=extent /WSEXTENT=20,000 (D)

Specifies the maximum size to which the image running in the RTR ACP can increase its physical memory size.

The default for extent is 20,000.

/WSQUOTA=max-working-set /WSQUOTA=10,000 (D)

Specifies the maximum size to which the image being executed in the RTR ACP process can increase its working set size.

The default for max-working-setis 10,000 pages.

RTR Command Line Interface 6–175