Compaq AA-Q88CE-TE manual Client Noclient, Concurrent D Noconcurrent

CALL RTR_OPEN_CHANNEL

/ACCESS=access /NOACCESS (D)

Specifies an access string (that is, a password). All application programs (clients and servers) must specify the same access string for a given facility.

/BE_CALL_OUT /NOBE_CALL_OUT (D)

Specifies that the RTR_F_OPE_BE_CALL_OUT flag is set in the flags parameter in the call to rtr_open_channel( ). The channel is opened as a backend call-out server.

/CHANNEL_NAME=channel-name

/CHANNEL_NAME=RTR$DEFAULT_CHANNEL

Specifies the name of the window's channel for use in subsequent operations on this channel.

channel_name is not case sensitive. The default channel name is

RTR$DEFAULT_CHANNEL.

/CLIENT

/NOCLIENT

Specifies that the RTR_F_OPE_CLIENT flag is set on the call to rtr_open_channel( ). The channel is opened as a client.

/CLUSTER /NOCLUSTER (D)

Specifies that the command is executed on all the nodes in the cluster.

If neither /NODE nor /CLUSTER is specified then the command is executed on the nodes specified by the latest SET ENVIRONMENT command. If no SET ENVIRONMENT command has been entered then the command is executed only on the node where the command was issued.

Note: In environments that do not support clustering, use of the /CLUSTER qualifier will cause the relevant command to be executed on the local node only.

/CONCURRENT (D)

/NOCONCURRENT

Specifying /NOCONCURRENT sets the RTR_F_OPE_NOCONCURRENT flag in the call to rtr_open_channel( ), and the server may not be concurrent with other servers. By default a server may have other concurrent servers.

/EVENTS=event-nr-list /NOEVENTS (D)

The /EVENTS qualifier specifies that broadcast events are received on the channel. To subscribe to all user and RTR events, enter the qualifier with no arguments. Enter /EVENTS=RTR to receive the full range of RTR events only. Enter /EVENTS=USER to receive the full range of USER events only. Specify particular ranges of event numbers using arguments in the following format:

/EVENTS=(RTR, n, TO, m, USER, p, TO, q)

where n, m, p and q are event numbers. The default is to listen to no events.

RTR Command Line Interface 6–17