Compaq AA-Q88CE-TE manual 174RTR Command Line Interface

START RTR

/DIOLM=io-direct

/DIOLM=(max-links + max-processes)22 + 10 = default io-direct (D)

Specifies the maximum number of direct I/O operations that the RTR ACP can have outstanding at any one time.

If you do not specify a direct I/O quota, the default value established at system generation time is used.

The default for io-directis automatically calculated based on the values for /LINKS and /PROCESSES.

/ENQLM=enqueue-limit /ENQLM=2000 (D)

Specifies the maximum number of locks that the RTR ACP can have outstanding at any one time.

The default for enqueue-limitis 2000.

/FILLM=file-limit

/FILLM=(max-links + max-processes) + 10 = default file-limit (D)

Specifies the maximum number of files that the RTR ACP can have open at any one time.

The default value of file-limitis automatically calculated, based on the values of /LINKS and /PROCESSES.

/JTQUOTA=job-table-quota /JTQUOTA=5000 (D)

Allows you to specify a quota the job-wide logical name table for the RTR ACP.

The default for job-table-quotais 1024.

/LINKS=max-links /LINKS=512 (D)

Specifies the maximum number of nodes with which this node can communicate. The default for max-linksis 512.

/NODE[=node-list] /NODE=default-node-list (D)

Specifies that the command is executed on all nodes specified in node-list. If node-listis omitted then the command is executed only on the node where the command was issued.

/OUTPUT[=file-spec] /OUTPUT=stdout (D)

Specifies that the resulting information is written to the file file-spec. If /OUTPUT or file-specis omitted then the standard or default output is used.

/PGFLQUOTA=page-file

/PGFLQUOTA=((max-links + max-processes)2400) + 16000 =default pages

(D)

Specifies the maximum number of pages allocated in the paging file for the RTR ACP.

The paging file quota is the amount of secondary storage available during execution of the RTR ACP image.

Note that a shortage of virtual memory may produce spurious error messages.

6–174RTR Command Line Interface