Compaq AA-Q88CE-TE manual Related commands, RESOURCEMANAGER=resource-list

CREATE FACILITY

Note: In environments that do not support clustering, use of the /CLUSTER qualifier will cause the relevant command to be executed on the local node only.

/FRONTEND=frontend-list /NOFRONTEND (D)

Frontend-listis a list of frontend-nodesseparated by commas. If there is more than one frontend-node, then frontend-listmust be enclosed in parentheses.

Frontend-nodeis either the name of a node or @file-spec, where file-specspecifies a text file containing a frontend-liston each line.

/NODE[=node-list] /NODE=default-node-list (D)

Specifies that the command is executed on all nodes specified in node-list. If node-listis omitted then the command is executed only on the node where the command was issued.

/OUTPUT[=file-spec] /OUTPUT=stdout (D)

Specifies that the resulting information is written to the file file-spec. If /OUTPUT or file-specis omitted then the standard or default output is used.

/RESOURCE_MANAGER=resource-list

Specifies a list of defined resource managers that this facility may reference. Server applications using this facility and resource manager will receive any recovered transactions when the facility is created. See Appendix C for further information.

/REPLY_CHECKSUM /NOREPLY_CHECKSUM (D)

Specifies that the reply consistency check (or Response Matching) feature for replayed messages is enabled. It is a check for reply consistency during a replay of a reply to client message.

RTR can enable, disable and display this feature.

/ROUTER=router-list /NOROUTER (D)

Specifies the names of the nodes that act as routers for this facility.

Router-listis a list of router-nodesseparated by commas. If there is more than one router-node, then router-listmust be enclosed in parentheses.

If /NOBALANCE is specified with the CREATE FACILITY command, then the order in which router nodes are specified with the /ROUTER qualifier defines the preferred routing order.

Router-nodeis either the name of a node or @file-spec, where file-specspecifies a text file containing a router-liston each line.

Related commands

•DELETE FACILITY

•EXTEND FACILITY

•SHOW FACILITY

•TRIM FACILITY

RTR Command Line Interface 6–49