Compaq AA-Q88CE-TE manual Show Channel channel-name, Channel-name

SHOW CHANNEL

SHOW CHANNEL

Show the names and state of channels that have been opened using the CLI API.

Format

SHOW CHANNEL [channel-name]

Command Qualifiers	Defaults
/ALL_WINDOWS	/NOALL_WINDOWS
/CLUSTER	/NOCLUSTER
/NODE=node-list	/NODE=default-node-list
/OUTPUT[=file-spec]	/OUTPUT=stdout

Description

The SHOW CHANNEL command shows the channel type (client or server), the channel name and owner process-id for channels opened using the CLI API.

Parameters

channel-name

Specifies the name of the channel to be displayed. channel-namecan contain wild cards. If channel-nameis omitted all declared channels for this window (terminal or virtual terminal) are displayed.

Qualifiers

/ALL_WINDOWS /NOALL_WINDOWS

Specifies that channels opened in all windows (terminals or virtual terminals) are shown.

/CLUSTER /NOCLUSTER (D)

Specifies that the command is executed on all the nodes in the cluster.

If neither /NODE nor /CLUSTER is specified then the command is executed on the nodes specified by the latest SET ENVIRONMENT command. If no SET ENVIRONMENT command has been entered then the command is executed only on the node where the command was issued.

Note: In environments that do not support clustering, use of the /CLUSTER qualifier will cause the relevant command to be executed on the local node only.

/NODE[=node-list] /NODE=default-node-list (D)

Specifies that the command is executed on all nodes specified in node-list. If node-listis omitted then the command is executed only on the node where the command was issued.

/OUTPUT[=file-spec] /OUTPUT=stdout (D)

Specifies that the resulting information is written to the file file-spec. If /OUTPUT or file-specis omitted then the standard or default output is used.

RTR Command Line Interface 6–129