Compaq AA-Q88CE-TE manual DECIMALS=decimal-places /DECIMALS=0 D

DISPLAY NUMERIC

The keyword can be one of the following:

Keyword	Meaning
NODE	Node data items
LINK	Link data items
FACILITY	Facility data items
PROCESS	Process data items
PARTITION	Partition data items
FE_TRANSACTION	Frontend transaction data items
TR_TRANSACTION	Backend transaction data items
BE_TRANSACTION	Router transaction data items

/BELL[=Boolean-expression] /NOBELL (D)

Sends a bell character to the terminal if Boolean-expressionevaluates to True (non-zero).

/BLANK[=Boolean-expression] /NOBLANK (D)

Specifies that the displayed value is replaced by blanks if Boolean-expressionevaluates to True (non-zero).

/BLINK[=Boolean-expression] /NOBLINK (D)

Specifies that the displayed value blinks if Boolean-expressionevaluates to True (non-zero).

/BOLD[=Boolean-expression] /NOBOLD (D)

Specifies that the item is displayed in high intensity if Boolean-expressionevaluates to True (non-zero).

/DAMPING[=damping-factor] /NODAMPING (D)

Specifies that the value displayed is to fluctuate more slowly than the raw measured value. The default for damping-factoris one. Damping is only relevant if /VALUE=CURRENT.

/DECIMALS[=decimal-places] /DECIMALS=0 (D)

Specifies the number of digits to appear after the decimal point when displaying a numeric. The default for decimal-placesis zero, that is, numbers are displayed as integers.

/LABEL=text /NOLABEL (D)

Specifies the text used to label the value being displayed. Symbols are substituted at display time. (See Section A.2, Substitution Symbols).

RTR Command Line Interface 6–73