Compaq AA-Q88CE-TE manual Register Resource Manager Register RM, Resourcename

REGISTER RESOURCE MANAGER (REGISTER RM)

REGISTER RESOURCE MANAGER (REGISTER RM)

Registers an instance of a resource manager (RM) with RTR.

Format

REGISTER RESOURCE MANAGER	[resource_name]
REGISTER RM [resource_name]
Command Qualifiers	Defaults
/open_string	/see the Oracle8 Administrator's Reference manual
/close_string	/see the Oracle8 Administrator's Reference manual
/switch_name	/see the Oracle8 Administrator's Reference manual
/library_path	/path to an XA library
/protocol	/XA

Description

The REGISTER RESOURCE MANAGER command registers multiple resource managers or instances of resource managers (up to 16) with the current transaction manager. A different resource manager (RM) instance name is needed for each referenced database. Use this command after RTR ACP is started and before RTR facilities that reference this resource manager are created.

Note

This command is available only on UNIX and Windows NT systems.

Refer to Appendix C, XA Support for support information about XA.

Parameters

resource_name

Specifies the name of the resource to be registered.

Any application program which uses this resource must specify the same name when it calls rtr_open_channel( ).

Resource names can contain up to thirty characters. Letters, numbers and underline characters are all valid, but the first character of a resource name must be a letter.

The default value for resource_name is RTR$DEFAULT_RESOURCE.

Related Commands

•UNREGISTER RESOURCE MANAGER

•SHOW RESOURCE MANAGER

RTR Command Line Interface 6–105