Compaq AA-Q88CE-TE manual Show Process

SHOW PROCESS

SHOW PROCESS

Display information about processes which are using RTR.

Format

SHOW PROCESS

Command Qualifiers	Defaults
/CLUSTER	/NOCLUSTER
/COUNTER[=counter-name]	/NOCOUNTER
/FULL	/NOFULL
/IDENTIFICATION=process-id	/NOIDENTIFICATION
/NODE[=node-list]	/NODE=default-node-list
/OUTPUT[=file-spec]	/OUTPUT=stdout

Description

The SHOW PROCESS command displays information about the processes using RTR.

Qualifiers

/CLUSTER /NOCLUSTER (D)

Specifies that the command is executed on all the nodes in the cluster.

If neither /NODE nor /CLUSTER is specified then the command is executed on the nodes specified by the latest SET ENVIRONMENT command. If no SET ENVIRONMENT command has been entered then the command is executed only on the node where the command was issued.

Note: In environments that do not support clustering, use of the /CLUSTER qualifier will cause the relevant command to be executed on the local node only.

/COUNTER[=counter-name] /NOCOUNTER (D)

Specifies that the process counters are also to be displayed. counter-nameis the name of the counter to be displayed. If counter-nameis omitted then all counters will be displayed. counter-namemay contain wild card characters.

/IDENTIFICATION=process-id

/NOIDENTIFICATION (D)

Specifies the process about which information is required. The default (/NOIDENTIFICATION) displays all processes using RTR.

/FULL /NOFULL (D)

Equivalent to specifying /COUNTER.

/NODE[=node-list] /NODE=default-node-list (D)

Specifies that the command is executed on all nodes specified in node-list. If node-listis omitted then the command is executed only on the node where the command was issued.

6–156RTR Command Line Interface