Compaq AA-Q88CE-TE manual IDENTIFICATION=process-id, Noidentification D

MONITOR

Note: In environments that do not support clustering, use of the /CLUSTER qualifier will cause the relevant command to be executed on the local node only.

/COUNT=nr-updates /COUNT=infinite (D)

Specifies how many times the RTR utility updates the screen before exiting or returning to the RTR> prompt.

The default is that RTR updates the screen until CTRL-Z, CTRL-Y or another RTR command is entered. The /COUNT qualifier may be used when the /OUTPUT qualifier is being used to redirect output to a file. In this case, nr-updatesspecifies how many screen images are written to the file.

/FACILITY=facility-name /NOFACILITY (D)

Specifies the name of the facility to be monitored. This is only meaningful if at least one facility counter is displayed.

/IDENTIFICATION=process-id

/NOIDENTIFICATION (D)

Specifies the hexadecimal process-id of the process to be monitored. This is only meaningful if at least one process counter is to be displayed.

/INTERVAL[=delay-seconds] /INTERVAL=2 (D)

Specifies how frequently RTR updates the screen. Delay-secondsis the number of seconds that RTR waits after completing one screen update before starting the next. Note that the interval between updates will always be slightly longer than Delay-seconds, depending on the complexity of the display and the number of nodes being monitored.

/LINK=link-name /NOLINK (D)

Specifies the node name for the link to be monitored. This is only meaningful if at least one link counter is to be displayed.

/NODE=node-list /NODE=default-node-list (D)

Specifies the names of the nodes to be monitored. If node-listis omitted then the local node is monitored.

/OUTPUT[=file-spec] /OUTPUT=stdout (D)

Specifies that the resulting information is written to the file file-spec. If /OUTPUT or file-specis omitted then the standard or default output is used.

/PARTITION=partition-name /NOPARTITION (D)

Specifies the names of the partitions to be monitored. Partitions names have the form node$facility$partition-id.

/RESUME /NORESUME (D)

Re-executes the last MONITOR command. The qualifiers /OUTPUT, /INTERVAL and /COUNT may be used with /RESUME. All other qualifiers are ignored. This

RTR Command Line Interface 6–101