Compaq AA-Q88CE-TE manual State Nostated

SHOW FACILITY

/CONFIGURATION /NOCONFIGURATION (D)

Specifies that the facility configuration is to be displayed. The configuration information indicates the role(s) of the the node where the command is executed, and

Whether router call-out servers or backend call-out servers have been configured,

Whether load balancing has been configured, Whether quorum check is being handled on this node.

Whether reply consistency check for replayed messages is enabled.

/COUNTER[=counter-name] /NOCOUNTER (D)

Specifies that the facility counters are displayed. Counter-nameis the name of the counter. If counter-nameis omitted then all counters are displayed. Counter-namemay contain wild card characters.

/FULL /NOFULL (D)

Equivalent to specifying /CONFIGURATION, /STATE and /LINK.

/LINKS /NOLINKS (D)

Lists all links to connected nodes in the facility (including the node where the command is executed. The following information is shown for each link:

Whether the node on this link is active as frontend, router or backend roles. What kind link is active, that is,

frontend to router router to frontend router to backend backend to router

Whether the router and backend roles are quorate,

Whether the router role is the current router for the frontend, Whether the backend role is acting as a load balancing coordinator.

/NODE[=node-list] /NODE=default-node-list (D)

Specifies that the command is executed on all nodes specified in node-list. If node-listis omitted then the command is executed only on the node where the command was issued.

/OUTPUT[=file-spec] /OUTPUT=stdout (D)

Specifies that the resulting information is written to the file file-spec. If /OUTPUT or file-specis omitted then the standard or default output is used.

/STATE

/NOSTATE(D)

Specifies that the state of the facility is displayed.

On nodes having a backend or router role, the quorum status is shown. Also, the current quorum threshold is shown (default quorum value is shown as zero), and the minimum broadcast rate (if it has been set).

RTR Command Line Interface 6–137