Compaq AA-Q88CE-TE manual RTR Utility Error Messages D-11

RTR Utility Error Messages

%RTR-E-ITMALREXI, There is already something displayed at x = [A], y = [A]

Explanation: Indicates that invalid coordinates were specified on a "DISPLAY" command within a display file. There already is an item at point [A], [B].

%RTR-F-IVKEYW, Unrecognized keyword - check validity and spelling n [A]

Explanation: A keyword specified in a command is not valid for the command. The rejected portion of the command is displayed between backslashes.

%RTR-F-IVQUAL, Unrecognized qualifier - check validity, spelling, and placement

n [A]

Explanation: An invalid qualifier is specified.

%RTR-F-IVVERB, Unrecognized command verb - check validity and spelling n [A]

Explanation: The first word in the command is not a valid CLI command or a name equated with a command. The rejected portion of the command is displayed between backslashes.

%RTR-W-JOUALREXI, Journal already created

Explanation: A previously existing journal was found.

This status may be returned by the CREATE JOURNAL command.

1)You have issued an RTR CREATE JOURNAL command without deleting the previous journal.

Corrective action:

a)Use the /SUPERSEDE qualifier with CREATE JOURNAL or b) Delete the old journal with the DELETE JOURNAL command.

%RTR-F-JOUFILMIS, RTR journal file missing - Find missing file or CREATE JOURNAL /SUPERSEDE

Explanation: One of previously initialized RTR journal files for a backend could not be found. This status may be returned by the CREATE FACILITY and SHOW JOURNAL commands.

Probable causes are:

(1)One of the disks being used for journalling is unavailable, or

(2)A user has inadvertently deleted an RTR journal file. Corrective action, either:

(a) Bring the missing disk back on line, or

(b)Reissue the RTR CREATE JOURNAL /SUPERSEDE command to create a new journal (in this case any recovery information in the old journal is lost).

RTR Utility Error Messages D–11