SHOW LINK

/FULL

Equivalent to specifying /FACILITY/STATE.

/NODE[=node-list] /NODE=default-node-list (D)

Specifies that the command is executed on all nodes specified in node-list. If node-listis omitted then the command is executed only on the node where the command was issued.

/OUTPUT[=file-spec] /OUTPUT=stdout (D)

Specifies that the resulting information is written to the file file-spec. If /OUTPUT or file-specis omitted then the standard or default output is used.

/STATE /NOSTATE (D)

Specifies that a detailed status of the specified link(s) is displayed.

Related Commands

SET LINK

CREATE FACILITY

SHOW FACILITY/LINK

Example

RTR> SHOW LINK/FULL IRON

Links:

To Node:

iron

Status:-

 

Outgoing message sequence nr:

22

Current

receive buffer size:

2048

Current

number of link users:

1

Write buffer full, may be sent: no

I/O error detected in write:

no

Pipe temporarily blocked:

no

Write issued, not completed:

no

Node

initiated the connection: yes

Connection

in progress:

no

Link

is in

disabled state:

no

Address: iron.zuo.dec.com

Incoming message sequence nr: 22

Current transmit buffer size: 2048

Write buffer timed out:

no

Write buffer allocated:

yes

I/O error detected in read:

no

Connection broken:

no

Read is pending:

yes

Connection established:

yes

Node is configured:

yes

Link may be suspect:

no

Facilities:-

 

 

 

 

 

In facility:

 

steve2

 

 

 

Frontend:

no

Router:

yes

Backend:

no

Router -> Frontend:

no

Frontend -> Router:

yes

 

 

 

 

Backend -> Router:

no

Router ->Backend:

no

 

 

Router quorate:

no

Backend quorate:

no

 

 

Router current:

yes

Backend coordinator:no

This example shows

The name and network address of the partner node.

Link status.

Name of facility using this link and how the link is used in the facility.

RTR Command Line Interface 6–145

Page 221
Image 221
Compaq AA-Q88CE-TE manual Full, RTR Show LINK/FULL Iron