When placing the disc onto the tray, hold the disc by the inner and outer edges with the disc label facing up as shown in Figure 1-2.

Figure 1-2: Holding a disc.

The disc tray can be locked using the LOCKCD.EXE utility (see the section “Locking the Disc Tray” in Chapter 4).

When there is a power or system failure, you can eject the disc tray by inserting a straightened paper clip into the Eject Hole and push hard (see Figure 1-3). Pull the ejected tray out gently as shown in Figure 1-4.

Figure 1-3: Inserting the straightened paper clip to eject the tray.

Knowing Your CD-ROM Drive 1-4

Page 13
Image 13
Creative GCD-R542B manual Holding a disc