Creative GCD-R542B manual Connecting data cable to the audio card

Connecting Cables to Your Audio Card

To connect the CD audio and data cables to your audio card (which has an IDE CD-ROM interface):

1.Connect the data cable to your audio card as shown in

Figure 2-10. Make sure you align the colored wire on the cable to Pin 1 of the IDE CD-ROM Data Connector.

If your audio card has multiple CD-ROM data connectors, connect the data cable to the IDE CD-ROM Data Connector.

Figure 2-10: Connecting data cable to the audio card.

2.Connect the CD audio cable to your audio card as shown in Figure 2-11.

Figure 2-11: Connecting CD audio cable to the audio card.

Setting Up Your CD-ROM Drive 2-8