DI-1162/DI-1162M Remote Access Router

The parameters are described as follows:

IP Address – This is the IP Address of the device that the router will attempt to reach. The router will check it routing table and try to locate the IP Address.

Count – The number of pings (packets) that will be sent.

Delay (10ms) – The amount of time in 10 millisecond intervals between each ping in the Count.

Start Ping Test - Press <Enter> or <Return> to begin the test.

IPX Ping Test

This test makes sure there is an IPX network connection to a particular IP address (DI-1162M only).

103

Page 109
Image 109
D-Link DI-1162M manual IPX Ping Test