DI-1162/DI-1162M Remote Access Router
IPX Static Route
The parameters are described below:
♦Network – This is the IPX network number.
♦Next Node Address – This is the next node address of the device that the router will attempt to reach.
♦Hops – This counts how many routers were passed through before the packet’s final destination on a network was reached. The number of hops is part of each network entry in a RIP packet.
♦Ticks – This is the time delay to reach a network. The number of ticks is part of each network entry in a RIP packet. There are about 18 ticks in a second.
♦Interface – Select the desired interface containing the gateway that the packets will be forwarded through.
♦State – This enables or disables a particular entry.
39
