
DI-1162/DI-1162M Remote Access Router
SNMP Community Configuration
Select and enter the SNMP Community Configuration submenu. You will see the following configuration screen:
The parameters are described below:
♦SNMP Community String – This community string is a
♦Access Right – This element of the set (Read Only, Read/Write) is called the SNMP access mode. If the SNMP Community String has an Access Right of Read/Write, then that Community String is available as an operand for the get, set, and get next operations. Otherwise, if the Community String’s corresponding Access Right is Read Only, then it is available as an operand for the get and get next operations only.
♦Status – This validates or invalidates the use SNMP Community String, by setting the string to Valid or Invalid. Note that setting the use of the string to Invalid is the same as removing the string, however, the string remains so as to be validated at an appropriate time.
SNMP Trap Manager
From the SNMP Agent Configuration menu, select and enter the SNMP Trap Manager submenu. You will see the following configuration screen:
42