D-Link DI-1162M manual Interface Configuration

DI-1162/DI-1162M Remote Access Router

♦System Description – This is a non-changeable, short description of the product.

♦System Object ID – This is the enterprise-specific MIB Object ID indicating this type of router.

♦System Up Time – Shows how long the router has been running since the last power off or reset.

♦System Contact – Enter the name of the department or individual responsible for maintaining the router.

♦System Name – Give the router a descriptive name for identification purposes.

♦System Location – Enter the physical location of the router.

♦Console/Telnet Display Timeout in Minutes – This is a security measure to automatically logoff from the console menu after a given idle time. Enter a timeout time between 0 and 90 minutes. Zero specifies no timeout.

♦System MAC Address –The physical address of this router.

♦External MAC Address – The physical address of the external LAN add-in module, if present.

Interface Configuration

Under Interface Configuration in the main menu is the following Interface Configuration screen, used to configure the interfaces for the LAN(s) and two WANs:

17