
Preface
•Interface Cable Connection: Connect the printer using the appropriate cable, as shown below.
•Front Panel Operation: The Front Panel consists of three lights and three
E4203, E4204 and E4304 |
•Normal Operating Mode: While in the normal operating mode, the printer’s buttons control operations such as pause, feed, and cancel. The FEED button is used to clear a fault after its cause has been removed. For testing and reset functions, combinations of the buttons must be simultaneously pressed, as follows:
‘F’ Buttons | Function(s) | |
| + | Prints the Internal Test Label (see the Operator’s Manual for an |
| example). | |
|
| |
|
|
|
| + | Performs a warm reset, and then returns to the normal operating mode. |
|
|
|
| + | Prints the Database Configuration and Dot Pattern Labels. |
|
|
|
+ | + | Resets the printer to factory defaults: Turn the printer ‘off’, then press |
and hold the buttons while turning the printer ‘on’. Continue to depress | ||
|
| the buttons until the Paused Indicator turns ‘off’. |
For setup and calibration functions see the Operator’s Manual.
4 |