Printing on Specialty Media
2.Insert the transparencies
7330-143
Note: Do not load paper above the fill line inside the tray.
3.Adjust the paper guides to the size of the transparencies.
4.If prompted on the control panel, press the OK button to accept the paper size and type that are shown. If you have changed the paper size or type, do the following:
a.Select Change setup, and then press the OK button.
b.Select Transparency, and then press the OK button.
c.Select the paper size, and then press the OK button to save your selection.
5.In the printer driver, select either Transparency as the paper type or the tray you loaded as the paper source.
