Dell 7330 manual Printing Transparencies from Trays

Printing on Specialty Media

2.Insert the transparencies long-edge feed into Tray 1 (MPT) or Tray 6.

MAX

7330-118

7330-142

Tray 1 (MPT) Long-Edge Feed Tray 6 Long-Edge Feed

Note: Do not load paper above the fill line inside the tray.

3.Adjust the paper guides to the size of the transparencies if necessary.

4.If prompted on the control panel, press the OK button to accept the paper size and type that are shown. If you have changed the paper size or type, do the following:

a.Select Change setup, and then press the OK button.

b.Select Transparency, and then press the OK button.

c.Select the paper size, and then press the OK button to save your selection.

5.In the printer driver, select either Transparency as the paper type or the tray you loaded as the paper source.

Printing Transparencies from Trays 2-5

1.Fan the transparencies to release sheets that may stick together.

7330-170

Dell 7330 Mono Laser Printer

4-36