Operational Safety
Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your printer.
Printer Location
Place the printer in a
Printer Clearance
Place the printer in an area where there is adequate space for ventilation, operation, and servicing. The recommended minimal spacing is:
Overhead Clearance
■30 cm (12 in.) above the printer without the finisher/stacker
■47 cm (18.5 in.) above the printer with the finisher/stacker
Total Height Requirements
■Printer: 74 cm (29 in.)
■Add 29 cm (11.5 in.) for the
Other Clearances
■20 cm (8 in.) behind the printer
■46 cm (18 in.) in front of the printer
■64 cm (25.2 in.) on the left side of the printer
■64 cm (25.2 in.) on the left side of the printer with
■20 cm (8 in.) on the right side of the printer
■100 cm (39.4 in.) on the right side of the printer with the finisher/stacker