3Align the notch on the bottom of the module with the crossbar in the connector.
3
| 2 |
|
|
| 1 |
|
|
|
|
| 4 |
1 | cutouts (2) | 2 | memory module |
3 | notch | 4 | crossbar |
NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module.
4Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
5Replace the PCI Express x16 card (see "Cards" on page 111).
6Replace the computer cover.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
7Connect your computer and devices to electrical outlets, and turn them on.
110
