6Remove the two screws securing the CD or DVD drive.
7Slide the CD or DVD drive out through the front of the computer.
8If you are not replacing the drive, replace the drive panel insert (see "Media Card Reader" on page 133).
9Replace the drive panel insert (see "Replacing the Drive Panel Insert" on page 132).
10Replace the bezel (see "Replacing the Bezel" on page 119).
11Replace the computer cover (see "Replacing the Computer Cover" on page 164).
12Connect your computer and devices to electrical outlets, and then turn them on.
13Configure the drives in system setup (see "Entering System Setup" on page 172).
Installing a CD or DVD Drive
1Follow the procedures in "Before You Begin" on page 97.
2Remove the computer cover (see "Removing the Computer Cover" on page 99).
3Remove the bezel (see "Removing the Bezel" on page 118).
4Gently slide the CD or DVD drive into place.
5Align the screw slots in the CD or DVD drive with the screw slots in the CD or DVD drive bay.
6Replace and tighten the two screws securing the CD or DVD drive.
7Connect the power and data cables to the drive.
8Connect the data cable to the system board connector on the system board.
