Using the Nvidia MediaShield ROM Utility
NOTICE: The following procedure will result in the loss of all data on your hard drive(s). Back up any data you want to keep before continuing.
Hard drives of any size may be used to create a RAID configuration. Ideally, however, the drives should be of equal size to avoid unallocated or unused space. For an explanation of RAID levels and their requirements, see "About RAID Configurations (For Windows Vista only)" on page 40. For information on how to install a hard drive, see "Installing a Hard Drive" on page 124.
1Enable RAID for each applicable hard drive on your computer (see "Setting Your Computer to
2Restart the computer.
3Press <F10> when prompted to enter the RAID BIOS.
NOTE: If the operating system logo appears, continue to wait until you see the Microsoft Windows desktop, then shut down your computer and try again.
The Define a New Array window appears.
4Press <Tab> to navigate to the RAID Mode field.
To create a RAID 1 configuration, use the arrow keys to select Mirroring.
5Press <Tab> to navigate to the Free Disks field.
6Use the up- and
NOTE: Your computer supports a maximum of two drives per RAID 1 array.
7After assigning the hard drives to an array, press <F9>. The Clear disk data prompt appears.
NOTICE: You will lose all data on the selected drives in the next step.
8Press <Y> to clear all data from the selected drives. The Array List window appears.
9To review the details of the array that you set up, use the arrow keys to highlight the array in the Array Detail window and press <Enter>.
The Array Detail window appears.
NOTE: To delete an array, use the arrow keys to select the array and press <D>.
Setting Up and Using Your Computer
43
