Installing Memory Modules

There are six SIMM sockets on the main system board organized in three banks consisting of two sockets each. Each socket can contain one SIMM.

You must fill the sockets in any bank you use with the same type of SIMM. The type of SIMMs you can install are 256KB, 1MB,

or 4MB.

You can install SIMMs for a total of 12MB of additional memory, which brings your system total to 14MB of on-board memory. To install the maximum amount of on-board memory, you would install the following SIMMs in the three banks:

Bank 0

Bank 1

Bank 2

AAA

4MB 4MB 1MB 1MB 1MB 1MB

The following is another example of an additional memory configuration:

Bank 0

Bank 1

Bank 2

AAA

1MB 1MB 256KB 256KB 1MB 1MB

This configuration adds 4MB plus 512KB for a total 6MB plus 512KB of on-board memory.

Note

When installing SIMMs, the only constraint is that you must install the same type of SIMM in both slots of a bank.

Installing and Removing Options 6-11